Parallel Gear Units

Parallel Gear Units

The parallel gear version of the MAXXDRIVE® industrial gear unit is manufactured according to the proven UNICASE housing principle and is available in all sizes. Because of this design, mixer drives can often be implemented without additional bearings. Large roller bearings and centre distances increase the load capacity and service life of the individual components. Effective cooling systems reduce temperatures and extend the life of lubricants. We offer short planning and delivery times. This is possible due to the extensive knowledge of our experts about the specific requirements for every application, as well as optimised stocking of components.

  • Performance

  • Torque range

  • Sizes

  • Mounting Positions

  • Ratios

: 1.5 kW - 6000 kW 

: 15,000 Nm - 282,000 Nm 

: 11 

: M1, M2, M3, M4, M5, M6 

: 5.54 – 30000 

  • Optimum sealing protects against lubricant leakage

  • Low noise operation reduces noise nuisance

  • High torque capacity

  • Increased lubricant life minimises maintenance costs

  • Symmetrical design

  • Mirror-image and inclined installation possible

  • Optimal integration into the customer application through six possible installation positions

  • Same housing size and installation dimensions for all speed ratios (two- and three-stage)

  • Input and output shafts can be adapted to customers' dimensions

  • Great reliability

  • Long service life

  • High precision


NORD MAXXDRIVE® Parallel Gear Units

Our MAXXDRIVE® Parallel Gear Units are used wherever high torques are required. For example, this was the case in a Moroccan phosphate mine: Here, phosphate ore with a weight of several hundred tons was to be transported for further processing via a two kilometre long conveyor belt.

For the belt drive, the customer decided on NORD MAXXDRIVE® Parallel Gear Units because these offer output torques of up to 282,000 Nm and powers of up to 6,000 kW. Thanks to their integration into the tried-and-tested UNICASE housing, the gear units also have high axial and radial load capacities. The Helical Gear Units can therefore easily withstand the harsh conditions of use on the conveyor belt.

What are the advantages of MAXXDRIVE® Parallel Gear Units?

  • Performance : MAXXDRIVE® Industrial Gear Units with helical gears are ideal for heavy duty applications due to their high torques.
  • Service life : Large roller bearings and precise alignment of shafts and gear wheels ensure a long service life for the gear units.
  • Flexible : The helical gear units can be combined with all electric motors from the NORD range.
  • Installation-friendly : Users have many options for the installation of output flanges (B14 flange as standard).

Our MAXXDRIVE® Industrial Helical Gear Units: Maximum flexibility
If you buy a NORD Parallel Gear Unit, you will have little difficulty in adapting it to your application. Rather, our gear units adapt themselves to your application.

To make installation as flexible as possible for our products, we offer you various shaft and flange options. Integration of the gear unit into your system is also facilitated by six mounting surfaces, which cover very different installation positions.

Due to their high performance and flexibility, NORD Helical Gear Units are ideally suited for use in many applications such as agitators, lifting gear, extruders, mixers, mills, drums or crushers.

Read more about the advantages of NORD MAXXDRIVE® Industrial Gear Units.



Catalogue - MAXXDRIVE® Industrial Gear Units (G1050)
Manual - MAXXDRIVE® Industrial Gear Units (B1050)
Create a website for free Online Stores